Paul Radio Stores

Detects Presence of Carbon Mono-Oxide. Range 0 to 1000PPM with record mode, backlit LCD, LED & beeper alarm.

CO-09 detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.

• Detects the presence of carbon monoxide (CO) and measures concentrations between 1 1000 parts per million (PPM)
• The meter indicates the presence of carbon monoxide in two ways
  By a reading on the LCD in PPM.
  By a beeper tone.
• Max Hold and Data Hold
• Backlit LCD Display

• The Metravi GD-09-1 Combustible Gas Detector and Alarm, has high sensitivity, a compact design and reliable performance for detecting combustible gas (like LPG) leaks.
• Adopting high-quality smart sensors and advanced techniques, the device is suitable for gas leak detection at premises where gas leaks are possible to occur, such as households, hotels, shopping malls, cafes, industrial kitchens, offices, canteens, etc.
• The device sounds an alarm with red flashing light, when gas concentrations reach or exceed the alarm set point, helping keep people safe from accidents like fire, explosion, suffocation, etc., due to the leak. 
• Where in the room should the sensor plug be installed?
• The detector/sensor should be installed at a distance from the gas source radius within 1.5M, more than 30cms below the ceiling for methane (like LNG) or more than 30cm above the floor for propane and butane (like LPG).

• High Accuracy CO sensor, Fast response and stable readings
• Sensor : Stabilized electro-chemical Gas-specific
• Large LCD display
• Compact, light and easy to carry
• Low battery consumption, long battery life.

• Portable voice-type 4-in-1 gas monitor (CO / H₂S / Ex / O₂).

• Predicts gas concentration and triggers alarms to ensure life safety.

• Made of high-strength engineering plastic with high-sensitivity gas sensors.

• Equipped with a 2.4″ IPS color screen.

• Built-in 3000 mAh Li-ion battery.

• Capable of monitoring combustible gas concentration.

• Supports sound, light, and vibration alarms.

• Includes voice broadcast function.

• Features pump detection with a built-in air pump.

• Can be connected to an external gas pipe and a multifunction detection handle.

• Stores up to 400 sets of data.

• Provides real-time data graph analysis.

• Rated IP54 for dustproof, waterproof, and explosion-proof protection.

• High Precision Electrochemical CO Sensor.
• Large LCD Display with Digit & Bargraph.
• Compact, Light & Easy to Carry.
• ‘HOLD’ Current Date.
• Low Battery Indication.
• Auto Power Off.